Autotransformer

Autotransformer


An autotransformer has only a single winding with two end terminals, plus a third at an intermediate tap point. The primary voltage is applied across two of the terminals, and the secondary voltage taken from one of these and the third terminal. The primary and secondary circuits therefore have a number of windings turns in common.[22] Since the volts-per-turn is the same in both windings, each develops a voltage in proportion to its number of turns. By exposing part of the winding coils and making the secondary connection through a sliding brush, an autotransformer with a near-continuously variable turns ratio is obtained, allowing for very fine control of voltage.